The SEL HDTV cart is a mobile technology display setup located on the lower level of South College.  Technology available on the cart includes a 55-inch Philips HDTV with an Episode sound bar, a Denon Blu-Ray player (inside the a/v cart cabinet), and wired connections for laptops and HD devices. 

The information below documents how to accomplish common tasks with the a/v equipment on the cart.

1. Connect one of the video cables (VGA or HDMI) from the cable bundle to the corresponding port on your laptop/device.

   • For audio with VGA, plug the 3.5mm audio cable into the headphone/audio output port on your laptop/device.

2. Press the Power button on the Philips HDTV remote control to activate the display.

   • Note that the infrared (IR) receiver for the HDTV remote is on the right side of the TV, so the remote will need to be aimed at that receiver in order to function.  The IR receiver will glow Green when the TV is ON, and Yellow when it is in standby mode.

3. Press the Source button on the Philips remote and then use the directional pad arrows and OK button to select the source that you have the laptop plugged into - either VGA or HDMI.

   • The active source will be highlighted in Blue on the selection menu.

4. Audio level can be adjusted using the Volume buttons on the Philips remote control.

5. When you are finished using the equipment, please press the Power button to shut down the display.

1. Press the Power button on the Philips HDTV remote control to activate the display.

   • Note that the infrared (IR) receiver for the HDTV remote is on the right side of the TV, so the remote will need to be aimed at that receiver in order to function.  The IR receiver will glow Green when the TV is ON, and Yellow when it is in standby mode.

2. Press the Power button on the Denon Blu-Ray remote or on the left side of the player in the AV rack to activate the Blu-Ray player.

3. Press the Source button on the Philips HDTV remote and then use the directional arrows and OK button to select the DVI-D source.

4. Press the Eject button on the Blu-Ray player (to the right of the disc tray) to open the tray and insert your disc, and then press the Eject button again to close the disc tray and launch the disc.

5. Use the directional pad, menu, and playback controls on the Denon Blu-Ray remote or the on-device controls to navigate and control the disc content.

6. Audio level can be adjusted using the Volume +/- buttons on the Blu-Ray remote.

7. When you are finished using the equipment, please press the Power buttons on the Blu-Ray player and HDTV to shut down the system.