MI 207

Owned by Adam Dinnes
Last updated: Aug 18, 2023
3 min read

MI 207 is a general-use classroom located on the second floor of Morse-Ingersoll Hall.  Instructional technology in this space includes a pull-down projection screen, ceiling-mounted projector, and an a/v lectern housing a classroom computer, Blu-Ray player, speaker, and connections for a laptop.  

The information below documents how to accomplish common tasks with the a/v equipment in the room.









Photo of MI 207 classroom

Capacity

30

Furniture

8 tables, 18 chairs, 12 tablet arm desks, 12ft chalkboard, two 18ft chalkboards, instructor's lectern.

Technology

Ceiling-mounted data/video projector, manual projection screen, instructor's a/v lectern with Blu-Ray player, Windows computer, speaker.

Special Notes

  • No food or drink permitted.

  • Notify Security x2355 for access on evenings and weekends.

Links





Projecting the built-in computer

  1. Press the Power button on the projector remote to activate the projector.

  2. Press the Power button on the upper right corner of the computer to boot the unit.

  3. Once the projector display comes up, press the Computer 1 button on the remote to display the computer.

  4. Audio volume can be adjusted on the computer using the speaker icon in the taskbar (lower right corner near the clock) or by using the audio adjustment dials on the front of the speaker.

  5. When you are finished using the equipment, please power down all components.



A/V Rack PC



Projecting from a laptop

  1. Connect the laptop VGA cable or the HDMI cable from the top of the podium to the corresponding port on your laptop.

  2. Press the Power button on the projector remote to activate the projector.

  3. Press the source button that corresponds with the video cable you are using, either DVI-I 3 (for VGA) or HDMI 6 button.

  4. For audio, plug the 3.5mm audio cable on the top of the rack into the headphone port on your laptop.

    • Audio volume can be adjusted on the computer using the speaker icon in the taskbar or by using the audio adjustment dials on the front of the speaker.

  5. When you are finished using the equipment, please power down all components.

 



Projecting the built-in Blu-Ray player

  1. Turn the projector ON using the Power button on the projector remote.

  2. Press the Power button on the projector remote to activate the projector.

  3. Press the Eject button on the Blu-Ray player to insert your disc, then press the Eject button again to close the tray.

  4. Press the Video 4 source button on the remote to display the Blu-Ray player.

  5. Control the video using the Blu-Ray player remote.

  6. Audio volume can be adjusted using the control knobs on the front of the speaker.

  7. When you are finished using the equipment, please power down all components.