...
To register a computer/device for wired network access you will first need to take the following steps:
Run all system updates for your device.
Install or update current anti-virus software (for devices that support anti-virus software).
Connect your device to a network network port (orange or blue wall port).
A laptop or device with a web browser.
Register a Device
...
Once you have prepared your device, follow the steps below to register it on the wired network. If your device does not have a web browser, skip to the second section below. If you have any problems getting your device connected, please contact IT Support.
Devices with a web browser:
Open your web browser. You should be automatically redirected to the registration page.
If not redirected, go to the registration site (https://
...
...
guest) and follow the directions on the page to register.
Devices without a web browser:
If your device does not have a browser and you are wired (plugged into an ethernet port):
Obtain the MAC address from the device.
Go to https://
...
...
guest to manually register the MAC address of your device.
If your device does not have a browser, cannot be connected to the wired network, and is unable to connect to BCNet wirelessly, you may be able to connect by following these steps:
Obtain the MAC address from the device (usually found in Network Settings menu).
Go to https://wifi.beloit.edu/guest to register the MAC address of your device.
Connect the device to BCMedia wireless network
...