Overview
Pairing the ēno stylus with the ēno receiver:
The ēno receiver connects to your computer’s USB port and pairs the Bluetooth signal with the ēno stylus. You can pair up to three ēno styli to one ēno receiver.
Power On your computer and assure that the ēno App version 3.0 or higher has already been installed. This software will be installed on your machine during the required training session..
Connect the ēno receiver to a USB port on the your computer.
Power On the ēno stylus by removing the cap.
Wait for the stylus LED to blink green once every three seconds.
Press and release the Pair button on the ēno receiver to pair the Bluetooth signal with the stylus.
While the ēno receiver searches for the ēno stylus Bluetooth signal, a status message appears on the computer screen and the LED on the ēno receiver flashes green.
If pairing is not successful, a status message appears on the computer screen.
If pairing was not successful, you can try to resolve the problem by removing the ēno receiver from the USB port, waiting five seconds, and reinserting it before attempting the pairing process again.
If pairing was not successful, refer to the Stylus LED status and troubleshooting section on page five.