SC 402

Overview


SC 402 is a general-use classroom located on the second floor of Sanger Center for the Sciences. Instructional technology in this space includes a  ceiling-mounted data/video projector, pull-down projection screen, wall-mounted speakers, wall-mounted a/v controller, connections for laptop, audio and analog video player. 

Contents





Panoramic Image of SC 402

Capacity

36

Furniture

Sixteen tables, chairs, instructor’s table, 6ft, 12ft and 24ft chalkboards.

Technology

Ceiling-mounted data/video projector, pull-down projection screen, wall-mounted speakers, wall-mounted a/v controller, connections for laptop, audio and analog video player.

Special Notes:

  • No food or drink permitted.

  • Notify Security x2355 for access on evenings and weekends.

Links:





Connecting laptop to VGA cable


  1. Connect the laptop VGA cable on the connections wall plate to the VGA port on your laptop.

    • For audio, plug the 3.5mm audio cable into the headphone/audio out port on your laptop.

  2. Press the On button on the wall-mounted Extron a/v controller to activate the room a/v system.

  3. Once the projector activates, press the Laptop button on the Extron controller.

  4. Press the Power button to boot up the laptop.

  5. Audio level can be adjusted using the Volume knob on the Extron controller.

  6. When you are finished using the equipment, please power down all components and press the Off button on the Extron controller.





Connecting laptop to HDMI cable


  1. Connect the laptop HDMI cable on the connections wall plate to the HDMI port on your laptop.

    • For audio, plug the 3.5mm audio cable into the headphone/audio out port on your laptop.

  2. Press the On button on the wall-mounted Extron a/v controller to activate the room a/v system.

  3. Once the projector activates, press the Laptop button on the Extron controller.

  4. Press the Power button to boot up the laptop.

  5. Audio level can be adjusted using the Volume knob on the Extron controller.

  6. When you are finished using the equipment, please power down all components and press the Off button on the Extron controller.





Projecting a video player


  1. Connect the video player to the connections wall plate using either:

    • a composite RCA cable for a DVD/VCR

    • an HDMI cable for a Blu-Ray player

  2. Press the On button on the wall-mounted Extron a/v controller to activate the room a/v system.

  3. Once the projector activates, press:

    • Video source button on the Extron controller for DVD/VCR.

    • HDMI source button on the Extron controller for a Blu-Ray player.

  4. Turn the video player ON using the Power button on the unit.

  5. Insert your tape or disc.

  6. Control the video using the menu and playback control buttons on the video player’s remote.

  7. Audio level can be adjusted using the Volume knob on the Extron controller.

  8. When you are finished using the equipment, please power down all components and press the Off button on the Extron controller.